best budget spinning bike image
ping_n_pon
I have a limited budget of $300 maximum. Which equipment would constitute a better cycling workout for me?
Answer
I prefer to train outside where the scenery is more varied besides those exercise bikes aren't very fast. .
I prefer to train outside where the scenery is more varied besides those exercise bikes aren't very fast. .
How do I customize my Diamondback bmx bike?
Tyler P
I have a stock Diamondback '04 Grind bmx bike and I want to customize it to a good flatland bmx. Can someone please tell me what kind of sprockets, wheels, forks, etc. I should put on it? Thanks
Answer
A new Flatland bmx will set you back between US$350 and US$2,000... depending on how good you want your parts to be. Obviously, the $2,000 bike will come with the best parts on the market today. Here's an example... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1311
At the cheaper end, you have the beginner-orientated bike, which has low-end parts, but good to start out with. Here's an example .. http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1124
As a rule of thumb, the more expensive a bike or part is, the lighter it will be, over the cheaper parts. When it comes to Flatland, a light bike is usually better, and will allow you to develop your skills a lot faster, and let you ride longer, without getting as tired as you would if you were riding a street bike for Flatland.
So in saying all that, here are your options...
1: Buy all new flatland parts for your current frame. http://flatlandfuel.com/index.asp?PageAction=VIEWCATS&Category=2
This option will set you back around $1000-1200, but keep in mind, your frame is way heavier than any flatland frame on the market, so you will more than likely switch to a flatland frame soon enough. If ur outlaying all that money for new parts, throw in the extra $300 and get urself a nice Flatland frame while ur at it... http://flatlandfuel.com/index.asp?PageAction=VIEWCATS&Category=26
2) If ur on a budget, spending thousands on a bike might not be such a good idea, and since ur new to Flatland, you might wanna get a good beginners bike, and then upgrade ur parts as you feel you need to, or can afford to. This way, you have a frame that you can stick with for years, without needing to upgrade. A good example of this kind of bike is this one... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1322 or this one... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1331
That last one is a beginner bike, but the same bike, with pro-range parts on it, looks like this... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1309, which is something you can turn the 'beginner bike' into, with some extra money.
You can still ride Flat on a street bike, if you change a few parts, it will just not be as 'smooth' and easy as riding a flatland bike. Heres what you will need to do to your current bike if you wanna make it more of a flat-bike...
- Get a longer seat post, around 300mm, and set it to max. height, as noted on the bottom of the post.
- Get minimal or zero offset forks, to make front wheel tricks way easier. They allow u to pop up onto the front wheel so eaisly.
- Put pegs on, all round.
- Be sure to have a gyro set up for back brakes
- Put a shorter reach stem on. Anywhere from 26mm-40mm.
- Get tyres no wider than 1.95, and make sure they're high-psi. For flatland, 120psi is super smooth for spinning and rolling.
- If you really wanna lighten ur bike without spending much, take the cranks off. You'll save about 2 kilos, and you can do a lot of tricks without needing to pedal. It's not a popular option, but it's a cheaper one.
So there are some options for you. The main deciding factor for people buying a Flatland bike, is budget. I splurged and bought pro-everything when I build mine, so I knew nothing was going to hold me back from learning, except myself. Right now, there is 10% off on all parts and bikes from the site I've posted links to, so now is the time to buy... you'll save a packet.
Email me if you have any more questions about any of this. :)
A new Flatland bmx will set you back between US$350 and US$2,000... depending on how good you want your parts to be. Obviously, the $2,000 bike will come with the best parts on the market today. Here's an example... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1311
At the cheaper end, you have the beginner-orientated bike, which has low-end parts, but good to start out with. Here's an example .. http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1124
As a rule of thumb, the more expensive a bike or part is, the lighter it will be, over the cheaper parts. When it comes to Flatland, a light bike is usually better, and will allow you to develop your skills a lot faster, and let you ride longer, without getting as tired as you would if you were riding a street bike for Flatland.
So in saying all that, here are your options...
1: Buy all new flatland parts for your current frame. http://flatlandfuel.com/index.asp?PageAction=VIEWCATS&Category=2
This option will set you back around $1000-1200, but keep in mind, your frame is way heavier than any flatland frame on the market, so you will more than likely switch to a flatland frame soon enough. If ur outlaying all that money for new parts, throw in the extra $300 and get urself a nice Flatland frame while ur at it... http://flatlandfuel.com/index.asp?PageAction=VIEWCATS&Category=26
2) If ur on a budget, spending thousands on a bike might not be such a good idea, and since ur new to Flatland, you might wanna get a good beginners bike, and then upgrade ur parts as you feel you need to, or can afford to. This way, you have a frame that you can stick with for years, without needing to upgrade. A good example of this kind of bike is this one... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1322 or this one... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1331
That last one is a beginner bike, but the same bike, with pro-range parts on it, looks like this... http://flatlandfuel.com/index.asp?PageAction=VIEWPROD&ProdID=1309, which is something you can turn the 'beginner bike' into, with some extra money.
You can still ride Flat on a street bike, if you change a few parts, it will just not be as 'smooth' and easy as riding a flatland bike. Heres what you will need to do to your current bike if you wanna make it more of a flat-bike...
- Get a longer seat post, around 300mm, and set it to max. height, as noted on the bottom of the post.
- Get minimal or zero offset forks, to make front wheel tricks way easier. They allow u to pop up onto the front wheel so eaisly.
- Put pegs on, all round.
- Be sure to have a gyro set up for back brakes
- Put a shorter reach stem on. Anywhere from 26mm-40mm.
- Get tyres no wider than 1.95, and make sure they're high-psi. For flatland, 120psi is super smooth for spinning and rolling.
- If you really wanna lighten ur bike without spending much, take the cranks off. You'll save about 2 kilos, and you can do a lot of tricks without needing to pedal. It's not a popular option, but it's a cheaper one.
So there are some options for you. The main deciding factor for people buying a Flatland bike, is budget. I splurged and bought pro-everything when I build mine, so I knew nothing was going to hold me back from learning, except myself. Right now, there is 10% off on all parts and bikes from the site I've posted links to, so now is the time to buy... you'll save a packet.
Email me if you have any more questions about any of this. :)
Powered by Yahoo! Answers
No comments:
Post a Comment