I have a whirlpool washer and the spin cycle will not work anymore.Do I need to buy a new washer?

best spin cycle to buy image

Brian x

My washer is a little over 5 years old none of the spin cycles works anymore no matter what the setting I put it on /perm press/delicate/ect.. The agitator works fine . Im not sure if I should have this repaired or just buy a new I would prefer to have it repaired if it wont be too expensive...

Answer
There are a few possible reasons this would occur:

- the lid switch is not working properly

- a faulty solenoid relay is not shifting the transmission into the spin cycle

- the timer which controls the solenoid relay is faulty

- the transmission itself is faulty.

In rare instances with belt-driven machines, a loose/worn belt will work in the agitation (wash) cycle but be too weak to spin the tub in the spin cycle. A burning rubber smell in your washroom would be a sign that the belt is slipping and needs to be replaced

My "vintage" whirlpool washer makes a terrible screeching/banging noise during spin cycle?

SusieDarli

I have a top loader, belt driven 30+ yr old washer that works very well but recently, during spin cycle only, it makes a terrible screeching noise and almost sounds as if the tub is banging against something (not sure about that part - could just be the terrible screeching noise that makes me think that, not sure). My question is could this be a matter of replacing the belt or could it be something more serious. I hate to get rid of it if it is something minor as other than this, it works very very well. Thanks for any info.

P.S. We have checked the level and it seems to be fine in that respect. My husband did adjust the belt to make it a little more taut but I have not tried it out yet since that was done. Original belt. There are approximate 3-4 pulleys underneath the washing machine that the belt goes on.
We took off the back and listened to the washer during the spin cycle. It seems as though the noise really escalates when water comes into the tub during the spinning/rinse cycles. When the washer is almost done and there is little water coming into the tub and is almost drained, the noise lessens. Does that mean anything. Also, we sprayed some lubricant into the mechanism while it was spinning and after that the noise seemed to lessen some. Hope this helps.

Answer
Bearings with out a doubt, and whether 'whirlpool/Philips' still have parts available you will only find out by speaking to them.
You could of course ask one of your local white goods service companies if this is some thing they can do/ get parts etc., rather than you having to buy new.
Hope this helps.

Powered by Yahoo! Answers

Starting to cycle to reduce stress on knees and ankles but have a few questions?

best spinning bike for beginner image

Ernest S

Where can i get an affordable road bike for beginners?

Any known places to ride in Shreveport or Bossier LA?

Any know clubs in Shreveport or Bossier for beginners?

Any other info is welcomed and needed. Thanx a ton

Answer
Ernest

Get a good used bike off of Craig's list, Ebay, classifieds , or garaga sales. Try rto saty with Trek, Specialized, Cannondale, or Giant.... BUT KNOW THE SIZE FRAME YOU NEED!

More importantly. to exercise with out the stress on knees and koints you need how to prosperly pedal. To do that you need to learn how to 'spin' the pedals. If you do not know use this forum to get the info. Do Not 'mash' the pedals, ie pedaling at too slow of a speed with too mush pressure. 'Spinning' is the proper way top ride a bike. Mashing will cause you almost as much stress and strain as running!

Soccerref

What should I get/ do to become a mountain bike racer?

pokerspade

I am an average novice bike rider. I want to know what I need to do to start training and eventually compete in mountain bike races. What kind of training and diet regiment should I follow? What kind of bike and helmet should I get? How do I even get into a race? I am looking for anyone who has experience in the sport who might be able to help an upstart wannabe racer make his dreams come true.

Answer
First off, I am sure you have a bike. But I am sure it's not 1. Fitted to you 2. Tuned 3. Has proper Components. If you want to race this summer the good news is you don't even need a bike right now. You need to be in the Gym 3-4 days a week taking Spinning classes, weight lifting on both legs and upper body and following a nutrition plan to skinny you up (yes Skinny riders are normally the fastest).

Bike, Ok so your now on your way to getting fit. That's good. But to race you need the right bike. Go to your best Local bike shop (check MTBR.com for review). And tell them your story, they will either outfit you with a better set up or take what you have and get it ready for racing..

Riding: MTB is not just about fitness or gear. But a lot about heart and finesse. I would find out from the shop were the last year races were, maybe there was a series that toured around your state. Then as soon as the weather is nice get out there and ride as much as you can, forget the Gym and just ride. It's a lot different then being on a stationary bike.

Once your comfy on the bike and all the trails (this is not as easy as you think). Make some friends that ride, again your shop is a good resource. and look into a good beginner race. This will get your feet wet with how it's done.

After you have raced a little the rest falls into place.. Good luck.

Powered by Yahoo! Answers